CLI Guide

Table 10. Details of clearpending (continued)
● BIOS FQDD
● NIC FQDD
● FC FQDD
● Storage controller FQDD
<FQDD>: The values are:
● BIOS.Setup.1–1
● NIC.Integrated.1–1
● RAID.Integrated.1–1
Output A message is displayed indicating that the pending state is cleared or deleted.
Example
racadm clearpending NIC.Integrated.1-1
closessn
Table 11. Details of closessn attribute
Description Closes a communication session on the device. Use getssninfo to view a list of sessions that can be
closed using this command.
To run this subcommand, you must have the Administrator permission.
NOTE: This subcommand ends all the sessions other than the current session.
Synopsis
● racadm closessn –i <session_ID>
●
racadm closessn -a
● racadm closessn -u <username>
Input
● —i <session_ID> — The session ID of the session to close, which can be retrieved using RACADM
getssninfo subcommand.
Session running this command cannot be closed.
● —a — Closes all sessions.
● —u <username> — Closes all sessions for a particular user name.
● For Remote RACADM, use either the —u option or the —i option.
Output
Successful or error message is displayed.
Example
● Closes the session 1234.
racadm closessn -i 1234
● Closes all the sessions other then the active session for root user.
racadm closessn –u root
● Closes all the sessions.
racadm closessn –a
RACADM Subcommand Details 49