CLI Guide

Table Of Contents
cfgRacTuneSshPort=22
cfgRacTuneIpRangeEnable=0
cfgRacTuneIpRangeAddr=192.168.1.1
cfgRacTuneIpRangeMask=255.255.255.0
# cfgRacTuneTimezoneOffset=-18000
# cfgRacTuneDaylightOffset=3600
cfgRacTuneLocalServerVideo (Read or Write)
Table 186. Details of cfgRacTuneLocalServerVideo
Description Enables or disables the local server video.
Legal Values
1 (TRUE Enables)
0 (FALSE Disables)
Default
1
cfgRacTuneLocalConfigDisable (Read or Write)
Table 187. Details of cfgRacTuneLocalConfigDisable attribute
Description Disables write access to iDRAC configuration data.
NOTE: Access can be disabled using the local RACADM or iDRAC web interface; however, once
disabled, access can be re-enabled only through iDRAC web interface.
Legal Values
0 (TRUE-Enables)
1 (FALSE-Disables)
Default
0
cfgRacTuneWebserverEnable (Read or Write)
Table 188. Details of cfgRacTuneWebserverEnable attribute
Description
Enables or disables the web server. If this property is disabled then it is not accessible using client web
browsers. This property has no effect on the Telnet/SSH or racadm interfaces.
Legal Values
1 (TRUE)
0 (FALSE)
Default
1
cfgRacTuneVirtualConsoleAuthorizeMultipleSessions (Read or
Write)
Table 189. Details of cfgRacTuneVirtualConsoleAuthorizeMultipleSessions
Description
If a first user is already using the Virtual Console, the value of this object affects the privileges granted to
the subsequent users shared request after the timeout of 30 seconds.
This object is applicable only for iDRAC on Rack and Tower Servers and not for iDRAC Enterprise on Blade
Servers.
NOTE: To modify this property, you must have Configure iDRAC permission. This object can be used
only with remote or firmware (SSH or Telnet) RACADM and not with local RACADM or with earlier
DRAC products.
iDRAC Property Database Group and Object Descriptions 183