Users Guide

iDRAC on blade server is not responding during boot.
Remove and reinsert the server.
Check CMC web interface to see if iDRAC is displayed as an upgradable component. If it does, follow the instructions in Updating
firmware using CMC web interface.
If the problem persists, contact technical support.
When attempting to boot the managed server, the power
indicator is green, but there is no POST or no video.
This happens due to any of the following conditions:
• Memory is not installed or is inaccessible.
• CPU is not installed or is inaccessible
• Video riser card is missing or not connected properly.
Also, see error messages in iDRAC log using iDRAC web interface or from the server LCD.
296 Frequently asked questions