Users Guide
* QLogic QLE2660 Single Port FC16 HBA (LP)
* QLogic QLE2662 Dual Port FC16 HBA
* QLogic QLE2662 Dual Port FC16 HBA (LP)
* QLogic QME2662 Dual Port FC16 HBA Mezzanine
* QLogic QLE2560 FC8 Single Channel HBA
* QLogic QLE2562 FC8 Dual Channel HBA
* QLogic FC8 Embedded Mezz Card QME2572
* Emulex LPe16000 Single Port FC16 HBA
* Emulex LPe16000 Single Port FC16 HBA (LP)
* Emulex LPe16002 Dual Port FC16 HBA
* Emulex LPe16002 Dual Port FC16 HBA (LP)
* Emulex LPm16002 Dual Port FC16 HBA Mezzanine
RAID
• H310 Adapter
• H310 Mini Monolithic
• H310 Mini Blades
• H310 Embedded
• H330 Adapter
• H330 Mini Monolithic
• H330 Mini Blades
• H330 Embedded
• H710 Adapter
• H710 Mini Blades
• H710 Mini Monolithic
• H710P Adapter
• H710P Mini Blades
• H710P Mini Monolithic
• H810 Adapter
• H830 Adapter
• H730P PERC9 Adapter
• PCIe Adapter
• PCIe Backplane
Integrated Broadcom NICs are controlled by both BIOS and the settings stored on the device itself. As a
result, the Boot Protocol field in the HII of integrated NICs has no effect; this setting is instead controlled
by the BIOS on the Integrated Devices screen.
To set integrated NICs to an iSCSI or PXE boot mode, select System BIOS Settings, and then select
Integrated Devices. In the list for each embedded NIC, select the appropriate value:
• Enabled for no boot capability.
• Enabled with PXE to use the NIC for PXE boot.
53