Users Guide
NOTE: You can also use System Setup utility during startup to configure the following devices. For
more information about the System Setup utility, see Using The System Setup Program And Boot
Manager.
• System BIOS Settings
• iDRAC Device Settings
• NICs
NOTE: You can configure only one NIC at a time.
– Broadcom 57810S DP 10G SFP+ Adapter (Full Height)
– Broadcom 57810S DP 10G SFP+ Adapter (Low Profile)
– Broadcom 57800S DP 10G BASE-T Adapter (Full Height)
– Broadcom 57800S DP 10G BASE-T Adapter (Low Profile)
– Broadcom 5720 DP 1G Adapter (Full Height)
– Broadcom 5720 DP 1G Adapter (Low Profile)
– Broadcom 5719 QP 1G Adapter (Full Height)
– Broadcom 5719 QP 1G Adapter (Low Profile)
– Broadcom 57800S QP rNDC (10G BASE-T + 1G BASE-T)
– Broadcom 57800S QP rNDC (10G SFP+ + 1G BASE-T)
– Broadcom 5720 QP rNDC 1G BASE-T
– Broadcom 57810S DP bNDC KR
– Broadcom 5719 QP 1G Mezz
– Broadcom 57810S DP 10G KR Mezz
– Intel i540 DP 10G BASE-T Adapter (Full Height)
– Intel i540 DP 10G BASE-T Adapter (Low Profile)
– Intel DP 10GBASE SFP+ (Full Height)
– Intel DP 10GBASE SFP+ (Low Profile)
– Intel i350 DP 1G Adapter (Full Height)
– Intel i350 DP 1G Adapter (Low Profile)
– Intel i350 QP 1G Adapter (Full Height)
– Intel i350 QP 1G Adapter (Low Profile)
– Intel i540 QP rNDC (10G BASE-T + 1G BASE-T)
– Intel i350 QP rNDC 1G BASE-T
– Intel i520 DP bNDC KR
– Intel DP 10Gb KR Mezz
– Intel DP 10Gb KR Mezz
– Intel I350 QP 1G Mezz
– ConnectX-3 Dual Port 10 GbE KR Blade Mezzanine Card
– ConnectX-3 Dual Port 10 GbE DA/SFP+ Network Adapter
– ConnectX-3 Dual Port 40 GbE QSFP+ Network Adapter
– Fibre Channel cards:
* QLogic QLE2660 Single Port FC16 HBA
52