Reference Guide

rollback

Descriptio

Allows you to roll back the firmware to an earlier version.

Synopsis

racadm rollback <FQDD>

NOTE: To get the list of available rollback versions and

FQDDs, run the racadm swinventory command.

Input <FQDD>: Specify the FQDD of the device for which the rollback

is required.

Example

racadm rollback iDRAC.Embedded.1-1

RAC1056: Rollback operation initiated

successfully.

sensorsettings

Descripti

Allows you to perform threshold settings of the sensor.

To run this subcommand, you must have Configure iDRAC

privilege.

NOTE: An error message is displayed when the following is

performed:

• A set operation is performed on an unsupported FQDD.

• Out of range settings is entered.

• Invalid sensor FQDD is entered.

• Invalid threshold level filter is entered.

Synopsis

racadm sensorsettings set <FQDD> -level Min

<value>

Input

• <FQDD> — Sensor or corresponding sensor FQDD which

needs a threshold configuration. Run the command, racadm

getsensorinfo

to view the sensor FQDD. The R/W field in

the output getsensorinfo indicates if the sensor thresholds

can be configured. Replace the <FQDD> field with the

corresponding sensor FQDD that needs a threshold

configuration.

• -level — threshold level for the sensor setting. Values are

Max or Min.