Reference Guide

• -s — Display current status.

NOTE: Use a forward slash (/) when providing the image

location. If backward slash (\) is used, override the backward

slash for the command to run successfully.

For example:

racadm remoteimage -c -u user -p password -

l /\/\10.94.192.100/\CommonShare/\diskette

NOTE: The following options only apply to connect and

deploy actions

• -u — Username

• -p — Password

• -1

Example

• Configure a Remote image.

racadm remoteimage -c -u "user" -p "pass" -

l //shrloc/foo.iso

Remote Image is now Configured

• Disable Remote File Sharing.

racadm remoteimage -d

Disable Remote File Started. Please check

status using -s option to know Remote File

Share is ENABLED or DISABLED.

• Check Remote File Share status.

racadm remoteimage -s

Remote File Share is Enabled

UserName

Password

ShareName //10.94.161.112/xxxx/

dtk_3.3_73_Linux.iso

• Deploy a remote image on iDRAC CIFS Share.

racadm remoteimage -c -u root -p calvin -l //

192.168.0.180/dev/floppy.img

• Deploy a remote image on iDRAC NFS Share.

racadm remoteimage -c -u root -p calvin -l '//

192.168.0.180/dev/floppy.img'