Reference Guide

-p <password> — Specifies the password of the remote share to import the file.
-r <reboot type> — Specifies the reboot type. The type can be one of the following:
pwrcycle — Power cycle
Graceful — Graceful reboot without forced shutdown
Forced — Graceful reboot with forced shutdown
-s <start time> — Specifies the start time for the scheduled job in yyyymmddhhmmss
format. The default value TIME_NOW starts the job immediately.
-e <expiration time> — Specifies the expiry time for the scheduled job in
yyyymmddhhmmss format. The default value TIME_NA does not apply the waiting time.
NOTE: For the diagnostic report run operation, the time difference between the —s and —e
options must be more than five minutes.
Output Provides the Job ID for the diagnostic operation.
Examples
To initiate a remote diagnostic operation:
racadm diagnostics run -m 1 -r forced -s 20121215101010 -e
TIME_NA
To export a remote diagnostics report to CIFS share:
racadm diagnostics export -f diagnostics -l //169.254.23.44/
cifs -u administrator -p password123
To export a remote diagnostics report to NFS share:
racadm diagnostics export -f diagnostics -l 169.254.23.44:/nfs
-u administrator -p password123
eventfilters
Description Gets, sets, tests the alerts for message ID, and displays the list of event filter settings.
To use this subcommand with the get and test option, you must have the Administrator privilege.
This subcommand is applicable only for iDRAC.
Synopsis
racadm eventfilters <eventfilters command type>
racadm eventfilters get -c <alert descriptor>
racadm eventfilters set -c <alert descriptor> -a <action> -n
<notifications>
racadm eventfilters set -c <alert descriptor> -a <action> -r
<recurrence>
racadm eventfilters test -i <Message ID to test>
NOTE: The general format of an alert descriptor:
idrac.alert.category.[subcategory].[severity]
where, category is mandatory, but subcategory and severity are optional. A severity cannot
precede a subcategory.
Valid Category values are:
All
System
Storage
38