Reference Guide

NOTE: This parameter input is an integer. If an alphanumeric input is
provided, then invalid subcommand syntax error is displayed.
• -n — Specifies the n Number of records to be displayed. On Local RACADM, if
this parameter is not specified, by default 100 logs are retrieved.
• -r — Displays events that have occurred after this time. The time format is yyyy-
mm-dd HH:MM:SS. The time stamp must be provided within double quotes.
• -e — Displays events that have occurred before this time. The time format is
yyyy-mm-dd HH:MM:SS. The time stamp must be provided within double quotes.
• -f <filename> — Specifies the file location and name where lifecycle log is
exported.
• -a <name> — Specifies the FTP Server IP address or FQDN, user name, and
password.
• -d <path> — Specifies the path to the file on the FTP server.
• -l <location> — Specifies the location of the network share or area on file
system where lifecycle log is exported. Two types of network shares are
supported:
– SMB mounted path: //< ipaddress or domain name >/< share_name >/
< path_to_image >
– NFS mounted path: < ipaddress >:/< path_to_image >.
• -u <user> — Specifies the user name for accessing the FTP Server, or Domain
and User Name for accessing network share location.
• -p <password> — Specifies the password for accessing the FTP Server or
Share location.
• -s — The severity used to filter the records. Provide multiple severities using a ","
as the delimiter. The value is case-insensitive. Valid Severity values:
– 1. Warning
– 2. Critical
– 3. Info
• < FQDD|Alias > — Specifies the FQDD or FQDD alias of the target device.
• < CATEGORY > — Specifies the category of Lifecycle Log entries to view. Possible
values are:
– all
– iDRAC
– Inventory
– ConfigurationService
– JobControl
– RemoteUpdate
– OsDeployment
– USC
– Other
• —m <Comment> — User comment string for a record to be inserted in the
Lifecycle Controller log. This should be less than 128 characters. The text should
be specified with in double quotes.
NOTE: HTML specific characters may appear as escaped text.
• -m <Worknote> — Used to add a worknote (an entry) in the Lifecycle log. This
should be less than 256 characters. The text should be specified within double
quotes.
NOTE: HTML specific characters may appear as escaped text.
101