White Papers

Integrating iDRAC7 with Active Directory
34
Note: At the bottom of the page (not visible in the figure), you see sections labeled Standard Schema
Settings and Standard Schema Role Groups. These are retained in the iDRAC configuration but are not
used when Extended Schema is selected. This allows you to easily switch between the two schema
options with minimal additional configuration.
Testing Extended Schema Configuration
1. Scroll down to the bottom of the Active Directory Configuration and Management Summary page,
and click Test Settings.
2. In Test User Name field, type the administrative user in [e-mail] format. For
example, [e-mail].
3. In the Test User Password field, type the user's password for the domain.
4. Click Start Test.
At the top of the results page, all tests must Pass (including Certificate Validation) or must be marked
Not Applicable/Not Configured/Not Run.
The Test Log at the bottom of page must have no errors and must list all nine privileges in the
Cumulative privileges gained section as shown in the following figure.