CLI Guide

To run this subcommand, you must have the Server Control privilege.
Synopsis
racadm krbkeytabupload [-f <filename>]
<filename> is the name of the le including the path.
Input -f — Species the lename of the keytab uploaded. If the le is not specied, the keytab le in the current
directory is selected.
Output
When successful Kerberos Keytab successfully uploaded to the RAC message is displayed. If
unsuccessful, appropriate error message is displayed.
Example
racadm krbkeytabupload -f c:\keytab\krbkeytab.tab
lclog
Table 63. Details of lclog
Description Allows you to:
• Export the lifecycle log history. The log exports to remote or local share location.
• View the lifecycle log for a particular device or category.
• Add comment to a record in lifecycle log.
• Add a work note (an entry) in the lifecycle log.
• View the status of a conguration job.
NOTE:
• When you run this command on Local RACADM, the data is available to RACADM as a USB partition and
may display a pop-up message.
• While Lifecycle Controller is running for racadm commands, you cannot perform other operation which
needs Lifecycle Controller Partition. If the Lifecycle Controller Partition is unreleased (because of improper
closure of racadm command in the partition), then you must wait 20-35 minutes to clear the Lifecycle
Controller Partition
Synopsis
racadm lclog view -i <number of records> -a <agent id> -c <category> -s
<severity> -b <sub-category> -q <sequence no> -n <number of records> -r <start
timestamp> -e <end timestamp>
racadm lclog comment edit –q <sequence number> -m <Text to be added>
racadm lclog export -f <filename> -u <username> -p <password> -l <CIFS or NFS
share>
racadm lclog export -f <filename> -u <username> -p <password> -l <CIFS or NFS
share> --complete
racadm lclog viewconfigresult -j <job ID>
racadm lclog worknote add -m <text to be added>
Input
• -i—Displays the number of records present in the active log.
• -a—The agent ID used to lter the records. Only one agent ID is accepted. The value is case-insensitive. Valid
Agent-ID values:
– UEFI_SS_USC
– CusOsUp
– UEFI_Inventory
– iDRAC
– UEFI_DCS
82 RACADM Subcommand Details