CLI Guide

• -dstpd-replaces a physical disk in virtual disk conguration.
• -vd-virtual disk fqdd to make it as a bootable drive.
• -speed—Species the initialization of the Virtual disk.
– fast—Performs fast initialization.
– full—Performs slow initialization.
• blink: <FQDD> or unblink: <FQDD>—<FQDD> can be
physical disk drives, virtual disks, or PCIeSSD.
• <PCIeSSD FQDD>—Species the PCIeSSD FQDD.
• <PCIeSSD controller|enclosure FQDD>—Species
the PCIeSSD controller or enclosure FQDD.
• preparetoremove—Species the PCIeSSD drive to prepare
for removal.
NOTE: Ensure that ISM is installed and running to
perform the preparetoremove operation.
• secureerase—Species the PCIeSSD drive to perform the
secure erase operation.
Example
Inventory
• To view the help details for get command, run the following command:
racadm>>storage help get
racadm storage help get
Storage monitoring and inventory of hardware RAID connected to the system.
Usage :
racadm storage get status
racadm storage help <Object type I/II>
racadm storage get <Object type I>
racadm storage get <Object type I> -current
racadm storage get <Object type I> -pending
racadm storage get <Object type I> -o
racadm storage get <Object type I> -o -p <property names separated by comma>
racadm storage get <Object type I>:<FQDD's of Object type I separated by comma> -p
<property names separated by comma>
racadm storage get <Object type I>:<FQDD's of Object type I separated by comma>
racadm storage get <Object type II> --refkey <reference keys separated by comma>
racadm storage get <Object type II> --refkey <reference keys separated by comma> -o
racadm storage get <Object type II> --refkey <reference keys separated by comma> -o
-p <property names separated by comma>
--------------------------------------------------------------------------------
Valid Options:
Object type I : controllers, batteries, vdisks, pdisks, fans, emms, tempprobes, psus,
enclosures.
Object type II : batteries, vdisks, pdisks, fans, emms, psus, tempprobes, enclosures.
-current <optional>: Displays only the current Raid objects from storage.If -pending not
mentioned it will consider as the default option
-pending : Displays only the Pending Raid Objects from Storage.
-o : Displays all the properties of the selected Key or Object.
-p : Displays the property names with filter.
FQDD's : Displays all the properties of the FQDD's Key.
--refkey : Displays all the reference key of Object type.
help : Displays each object type help.
NOTE: Maximum Property names can be specified in -p option is = 10.
NOTE: Maximum FQDD's or refkey can be specified is = 3.
--------------------------------------------------------------------------------
Usage Examples :
racadm storage get controllers
racadm storage get psus
RACADM Subcommand Details
113