Users Guide

32 Configuring iDRAC6 Enterprise
For greater security, access to iDRAC6 configuration through iDRAC6
Configuration Utility or disable the local RACADM CLI using a RACADM
command (see RACADM Command Line Reference Guide for iDRAC and
CMC available on support.dell.com/manuals) or from the GUI (see
"Enabling or Disabling Local Configuration Access" on page 119.)
NOTE: Using more than one configuration interface at the same time may generate
unexpected results.
Table 2-1. Configuration Interfaces
Interface Description
iDRAC6 Configuration
Utility
Accessed at boot time, iDRAC6 Configuration
Utility is useful when installing a new Dell
PowerEdge server. Use it for setting up the
network and basic security features and
for enabling other features.
iDRAC6 Web Interface iDRAC6 Web interface is a browser-based
management application that you can use to
interactively manage iDRAC6 and monitor the
managed server. It is the primary interface for
day-to-day tasks, such as monitoring system
health, viewing the system event log,
managing local iDRAC6 users, and launching
CMC Web interface and Virtual Console
sessions.
CMC Web Interface In addition to monitoring and managing the
chassis, use the CMC Web interface to view
the status of a managed server, update iDRAC6
firmware, configure iDRAC6 network settings,
logon to iDRAC6 Web interface, and to start,
stop, or reset the managed server.