Users Guide

Configuring and Using Serial Over LAN 189
NOTE: Ensure that the SOL baud rate is identical to the Failsafe Baud Rate
that was set in BIOS.
5 Click Apply if you have made any changes.
6 Change the configuration on the Serial Over LAN Configuration
Advanced Settings
screen, if necessary. Dell recommends using the default
values.
Advanced Settings allows you to adjust SOL performance by
changing the
Character Accumulate Interval and Character Send
Threshold
values. For optimal performance, use the default settings of 10
milliseconds and 255 characters respectively.
Table 11-1. Serial Over LAN Configuration Settings
Setting Description
Enable Serial
Over LAN
When selected, the checkbox indicates that Serial Over LAN is
enabled.
Baud Rate Indicates the data speed. Select a data speed of 9600 bps, 19.2
kbps, 57.6 kbps, or 115.2 kbps.
Channel
Privilege Level
Limit
Select a privilege level limit for Serial Over LAN.
Table 11-2. Serial Over LAN Configuration Buttons
Button Description
Print Prints the Serial Over LAN configuration values that appear on
the screen.
Refresh Reloads the Serial Over LAN screen.
Advanced
Settings
Opens the Serial Over LAN Configuration Advanced Settings
screen.
Apply Applies any new settings that you make while viewing the Serial
Over LAN screen.