Owner's Manual

Configuring iDRAC6 Enterprise 47
Configuring Networking for iDRAC6
1 Click the System → Remote Access → iDRAC .
2 Click the Network/Security tab:
To enable or disable Serial Over LAN:
a Click Serial Over LAN .
The
Serial Over LAN screen appears.
b Select the Enable Serial Over LAN check box. You may also change
the
Baud Rate and Channel Privilege Level Limit settings.
c Click Apply .
To enable or disable IPMI Over LAN:
a Click Network .
The
Network Configuration screen appears.
b Click IPMI LAN Settings .
c Select the Enable IPMI Over LAN check box. You may also change
the
Channel Privilege Level Limit and Encryption Key settings.
d Click Apply .
To enable or disable DHCP:
a Click Network .
The
Network Configuration screen appears.
b Click Network Settings .
• To use DHCP for NIC IP address, select the
Use DHCP (for NIC
IP Address)
check box.
• To use DHCP to obtain DNS server addresses, select the
Use
DHCP to obtain DNS server addresses
check box.
c Click Apply .
NOTE: If you choose not to enable DHCP, you must enter the static
IP address, netmask, and default gateway for the server.