White Papers

Configure MPIO card firmware
18 Dell EMC SC Series: Microsoft Multipath I/O Best Practices | CML1004
4. Reset the host adapter to factory defaults by selecting Configuration Settings > Restore Default
Settings.
5. Return to the main screen and select any additional HBAs one at a time and reset them to factory
defaults.
6. Reboot the host server and press Ctrl+Q when prompted to access Fast!UTIL.
7. Set the following parameters on the first HBA:
a. Under Configuration Settings > Adapter Settings:
i. Set Host Adapter BIOS to Enabled.
ii. If this parameter is listed, set Connection Options to 1 (Point to Point only).
iii. Leave all other settings at the defaults.
iv. Press Esc and save the changes.