Service Manual

Steps

1. Align and place the I/O board on the palm-rest and keyboard assembly.

2. Install the three screws (M2x3) that secure the I/O board to the palm-rest and keyboard assembly.

3. Connect the I/O-board cable to the I/O board.

Next steps

1. Install the left fan.

2. Install the base cover.

3. Follow the procedure in After working inside your computer.

Display assembly

Removing the display assembly

Prerequisites

1. Follow the procedure in Before working inside your computer.

2. Remove the base cover.

3. Remove the heat sink.

Removing and installing components