Manualshelf

Command Line Reference Guide

ManualsBrandsDell ManualsSoftwareForce10
71727374757677787980
flash:// (Optional). Enter the flash:// keyword. The default is to
use the flash drive. You can just enter the image file name.
img-file Enter the name the Dell Networking software image file to
validate.
hash-value (Optional). Enter the relevant hash published on i-Support.
Defaults flash drive
Command
Modes
EXEC mode
Command
History
Version 9.5.(0.0)
Introduced on the Z9000, S6000, S4820T, S4810, MXL
Usage
Information
You can enter this command in the following ways:
• verify md5 flash://img-file
• verify md5 flash://img-file <hash-value>
• verify sha256 flash://img-file
• verify sha256 flash://img-file <hash-value>
Example
Without Entering the Hash Value for Verification using SHA256
Dell# verify sha256 flash://FTOS-SE-9.5.0.0.bin
SHA256 hash for FTOS-SE-9.5.0.0.bin:
e6328c06faf814e6899ceead219afbf9360e986d692988023b749e6b2093e93
3
Entering the Hash Value for Verification using SHA256
Dell# verify sha256 flash://FTOS-SE-9.5.0.0.bin
e6328c06faf814e6899ceead219afbf9360e986d692988023b749e6b2093e93
3
SHA256 hash VERIFIED for FTOS-SE-9.5.0.0.bin
File Management
77