Reference Guide

pre-Version
6.1.1.1
Introduced on the E-Series.
Related
Commands
show ip ospf asbr — displays the VLAN configuration.
distance
Define an administrative distance for particular routes to a specific IP address.
Z9000
Syntax
distance weight [ip-address mask access-list-name]
To delete the settings, use the no distance weight [ip-address mask access-
list-name] command.
Parameters
weight Specify an administrative distance. The range is from 1 to 255. The
default is 110.
ip-address (OPTIONAL) Enter a router ID in the dotted decimal format. If you
enter a router ID, include the mask for that router address.
mask (OPTIONAL) Enter a mask in dotted decimal format or /n format.
access-list-name (OPTIONAL) Enter the name of an IP standard access list, up to 140
characters.
Defaults 110
Command Modes ROUTER OSPF
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Added support for the Multi-Process OSPF.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.1.1.1
Introduced on the E-Series.
962