Reference Guide

The following is a list of the FTOS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
Version 6.5.1.0 Introduced on the E-Series.
spanning-tree mstp edge-port
Configures the interface as an MST edge port and optionally a Bridge Protocol Data Unit (BPDU) guard.
Z9000
Syntax
spanning-tree mstp edge-port [bpduguard [shutdown-on-
violation]]
Parameters
mstp edge-port Enter the keyword mstp then the keywords edge-port to
configure the interface as a Multiple Spanning Tree edge port.
bpduguard (OPTIONAL) Enter the keyword portfast to enable Portfast to
move the interface into forwarding mode immediately after the root
fails. Enter the keyword bpduguard to disable the port when it
receives a BPDU.
shutdown-
onviolation
(OPTIONAL) Enter the keywords shutdown-on-violation to
hardware disable an interface when a BPDU is received and the port
is disabled.
Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.1 Introduced on the S4810.
Version 8.2.1.0 Introduced the hardware shutdown-on-violation option.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
939