Reference Guide

Parameters
connected Enter the keyword connected to redistribute active routes into IS-
IS.
rip Enter the keyword rip to redistribute RIP routes into IS-IS.
static Enter the keyword static to redistribute user-configured routes
into IS-IS.
metric metric-
value
(OPTIONAL) Assign a value to the redistributed route. The range is
from 0 to 16777215. The default is 0. Use a value that is consistent with
the destination protocol.
metric-type
{external |
internal}
(OPTIONAL) The external link type associated with the default route
advertised into a routing domain. Specify one of the following:
• external
• internal
level-1 (OPTIONAL) Routes are independently redistributed into IS-IS as
Level 1 routes.
level-1-2 (OPTIONAL) Routes are independently redistributed into IS-IS as
Level-1-2 routes.
level-2 (OPTIONAL) Routes are independently redistributed into IS-IS as
Level 2 routes. This setting is the default.
route-map map-
name
(OPTIONAL) If you do not enter the route-map argument, all routes
are redistributed. If a map-name value is not specified, no routers are
imported.
Defaults
• metric metric-value = 0
• metric-type= internal; level-2
Command Modes
• ROUTER ISIS ( for IPv4 )
• CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 ( for IPv6 )
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.12.0 Introduced on the S4810.
Version 7.5.1.0 Added support for IPv6 ISIS.
Version 6.3.1.0 Introduced.
826