Reference Guide

Version 7.5.1.0 Introduced on the C-Series.

E-Series Original command

Usage

Information

After entering the banner login command, type one or more spaces and a delineator character.

Enter the banner text then the second delineator character. When the user is connected to the

router, if a message of the day banner is configured, it displays first. If no message of the day

banner is configured, the login banner and prompt appear. After the user has logged in, the

EXEC banner (if configured) displays.

Example

FTOS(conf)#banner login ?

keyboard-interactive Press enter key to get prompt

LINE c banner-text c, where 'c' is a delimiting character

FTOS(conf)#no banner login ?

keyboard-interactive Prompt will be displayed by default

<cr>

FTOS(conf)#banner login keyboard-interactive

Enter TEXT message. End with the character '%'.

This is the banner%

FTOS(conf)#end

FTOS#exit

13d21h9m: %RPM0-P:CP %SEC-5-LOGOUT: Exec session is terminated

for user on line console

This is the banner

FTOS con0 now available

Press RETURN to get started.

13d21h10m: %RPM0-P:CP %SEC-5-LOGIN_SUCCESS: Login successful

for user on line console

This is the banner

FTOS>

Commands

banner motd — sets a Message of the Day banner.

exec-banner — enables the display of a text string when you enter EXEC mode.

banner motd

Set a message of the day (MOTD) banner.

Z9000

Syntax

banner motd c line c

Parameters

Enter a delineator character to specify the limits of the text banner.

The delineator is a percent character (%).

line

Enter a text string for your MOTD banner the message with your

delineator. The delineator is a percent character (%).