Reference Guide

show ip bgp ipv6 unicast neighbors
Allows you to view the information exchanged by BGP neighbors.
Z9000
Syntax
show ip bgp ipv6 unicast neighbors [ipv6-address prefix-length
[advertised-routes | dampened-routes | detail | flap-statistics
| routes]]
Parameters
ipv6-address
prefix-length
(OPTIONAL) Enter the IPv6 address in the x:x:x:x::x format then the
prefix length in the /x format. The range is from /0 to /128.
NOTE: The :: notation specifies successive hexadecimal fields of
zeros.
advertised-routes (OPTIONAL) Enter the keywords advertised-routes to view
only the routes the neighbor sent.
dampened-routes (OPTIONAL) Enter the keywords dampened-routes to view
information on dampened routes from the BGP neighbor.
flap-statistics (OPTIONAL) Enter the keywords flap-statistics to view flap
statistics on the neighbor’s routes.
detail (OPTIONAL) Display detailed neighbor information.
routes (OPTIONAL) Enter the keyword routes to view only the neighbor’s
feasible routes.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.4.2.1 Introduced on the C-Series and S4810.
Version 7.5.1.0 Added the detail option and added information to the output.
Version 7.4.1.0 Introduced on the E-Series TeraScale.
Usage
Information
The following describes the show ip bgp ipv6 unicast neighbors command
shown in the Example below.
Lines Beginning
With
Description
BGP neighbor Displays the BGP neighbor address and its AS number. The last
phrase in the line indicates whether the link between the BGP router
778