Reference Guide

Version 7.6.1.0 Introduced on the S-Series.

Version 7.5.1.0 Introduced on the C-Series.

pre-Version

6.1.1.0

Introduced on the E-Series.

Usage

Information

FTOS does not support sending DNS queries over a VLAN. DNS queries are sent out on all

other interfaces, including the Management port.

You can separately configure both IPv4 and IPv6 domain name servers.

Commands

ipv6 name-server — configures an IPv6 name server.

ip proxy-arp

Enable proxy ARP on an interface.

Z9000

Syntax

ip proxy-arp

To disable proxy ARP, use the no ip proxy-arp command.

Defaults Enabled.

Command Modes INTERFACE

Command History

This guide is platform-specific. For command information about other platforms, refer to the

relevant

FTOS Command Line Reference Guide

The following is a list of the FTOS version history for this command.

Version 8.3.19.0 Introduced on the S4820T.

Version 8.3.11.1 Introduced on the Z9000.

Version 8.3.7.0 Introduced on the S4810.

Version 8.1.1.0 Introduced on the E-Series ExaScale.