Reference Guide

Usage
Information
If no ports are GVRP participants, the message output changes from GVRP Participants
running on <port_list> to GVRP Participants running on no ports.
Example
R3#show gvrp brief
GVRP Feature is currently enabled.
Port GVRP Status Edge-Port
----------------------------------------------
Gi 3/0 Disabled No
Gi 3/1 Disabled No
Gi 3/2 Enabled No
Gi 3/3 Disabled No
Gi 3/4 Disabled No
Gi 3/5 Disabled No
Gi 3/6 Disabled No
Gi 3/7 Disabled No
Gi 3/8 Disabled No
R3#show gvrp brief
Related
Commands
show gvrp statistics — displays the GVRP statistics.
show gvrp statistics
Display the GVRP configuration statistics.
Z9000
Syntax
show gvrp statistics {interface interface | summary}
Parameters
interface
interface
(OPTIONAL) Enter the keyword interface then one of the
interface keywords and slot/ port or number information:
• For a Port Channel interface, enter the keywords port-
channel then a number. The range is from 1 to 128.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
summary Enter the keyword summary to display just a summary of the GVRP
statistics.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
462