Reference Guide

Defaults none
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced on the S-Series.
Usage
Information
The unit numbers given are internal port numbers. For a cross reference of the internal and
user port numbers, refer to the Z9000 Debugging and Diagnostics chapter in the FTOS
Configuration Guide for the Z9000 System .
show hardware layer3
Display Layer 3 ACL or QoS data for the selected stack member and stack member port-pipe.
Z9000
Syntax
show hardware layer3 {acl | qos} stack-unit number port-set
number
Parameters
acl | qos Enter either the keyword acl or the keyword qos to select between
ACL or QoS data.
stack-unit
number
Enter the keywords stack-unit then a number to select a stack
ID. The range is 0 to 7 for the Z9000.
port-set number Enter the keyword port-set with a port-pipe number. The range is 0 to
1 for the Z9000.
Defaults none
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.11.0 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced on the S-Series.
394