Reference Guide

The following is a list of the FTOS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.8.0 Introduced on the S4810.
Usage
Information
Create a policy-map by associating a queue number with the qos-policy.
Create QoS policies prior to enabling this command.
For CoPP, do not use the keywords cpu-qos when creating qos-policy-input.
Related
Commands
qos-policy-input — creates a QoS input policy map.
policy-map-input — creates an input policy map.
service-policy rate-limit-protocols
Apply a policy for the system to rate limit control protocols on a per-protocol basis.
Z9000
Syntax
service-policy rate-limit-protocols policy-name
Parameters
policy-name Enter the service-policy name, using a string up to 32 characters.
Defaults Not configured.
Command Modes CONTROL-PLANE-CPUQOS
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.8.0 Introduced on the S4810.
Usage
Information
This command applies the service-policy based on the type of protocol defined in the ACL
rules.
Create ACL and QoS policies prior to enabling this command.
For CoPP, do not use the keywords cpu-qos when creating qos-policy-input.
Related
Commands
ip access-list extended — creates an extended IP ACL.
mac access-list extended — creates an extended MAC ACL.
qos-policy-input — creates a QoS input policy map.
class-map — creates a QoS class map.
382