Reference Guide

Defaults Not configured.
Command Modes ROUTER BGP
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 6.5.1.0 Introduced
aggregate-address
To minimize the number of entries in the routing table, summarize a range of prefixes.
Z9000
Syntax
aggregate-address ip-address mask [advertise-map map-name] [as-
set] [attribute-map map-name] [summary-only] [suppress-map map-
name]
Parameters
ip-address mask Enter the IP address and mask of the route to be the aggregate
address. Enter the IP address in dotted decimal format (A.B.C.D) and
mask in /prefix format (/x).
advertise-map
map-name
(OPTIONAL) Enter the keywords advertise-map then the name of
a configured route map to set filters for advertising an aggregate
route.
as-set
(OPTIONAL) Enter the keyword as-set to generate path attribute
information and include it in the aggregate.
AS_SET includes AS_PATH and community information from the
routes included in the aggregated route.
attribute-map
map-name
(OPTIONAL) Enter the keywords attribute-map then the name of
a configured route map to modify attributes of the aggregate,
excluding AS_PATH and NEXT_HOP attributes.
summary-only (OPTIONAL) Enter the keyword summary-only to advertise only
the aggregate address. Specific routes are not advertised.
suppress-map
map-name
(OPTIONAL) Enter the keywords suppress-map then the name of a
configured route map to identify which more-specific routes in the
aggregate are suppressed.
Defaults Not configured.
Command Modes
• ROUTER BGP ADDRESS FAMILY
• ROUTER BGP ADDRESS FAMILY IPv6
258