Reference Guide

rmon collection statistics
Enable RMON MIB statistics collection on an interface.
Z9000
Syntax
rmon collection statistics {controlEntry integer} [owner name]
To remove RMON MIB statistics collection on an interface, use the no rmon collection
statistics {controlEntry integer} command.
Parameters
controlEntry
integer
Enter the keyword controlEntry to specify the RMON group of
statistics using a value. Then enter an integer value from 1 to 65535
that identifies the RMON Statistic Table. The integer value must be a
unique in the RMON statistic table.
owner name (OPTIONAL) Enter the keyword owner then the owner name to
record the owner of the RMON group of statistics.
Defaults none
Command Modes CONFIGURATION INTERFACE (config-if)
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
Version 6.1.1.0 Introduced on the E-Series.
rmon event
Add an event in the RMON event table.
Z9000
Syntax
rmon event number [log] [trap community] [description string]
[owner name]
To disable RMON on an interface, use the no rmon event number [log] [trap
community] [description string] command.
1194