Reference Guide

Parameters

wred-profile-

name

Enter your WRED profile name in character format (16 character

maximum). Or use one of the pre-defined WRED profile names. You

can configure up to 26 WRED profiles plus the five pre-defined

profiles, for a total of 31 WRED profiles.

Pre-defined Profiles: wred_drop, wred-ge_y, wred_ge_g,

wred_teng_y, wred_teng_g.

Defaults The five pre-defined WRED profiles. When you configure a new profile, the minimum and

maximum threshold defaults to predefined wred_ge_g values.

Command Modes CONFIGURATION

Command History

This guide is platform-specific. For command information about other platforms, refer to the

relevant

FTOS Command Line Reference Guide

The following is a list of the FTOS version history for this command.

Version 8.3.19.0 Introduced on the S4820T.

Version 8.3.11.1 Introduced on the Z9000.

Version 8.3.7.0 Introduced on the S4810.

pre-Version

6.1.1.1

Introduced on the E-Series

Usage

Information

Use the default pre-defined profiles or configure your own profile. You cannot delete the pre-

defined profiles or their default values. This command enables WRED configuration mode —

(conf-wred).

Commands

threshold — specifies the minimum and maximum threshold values of the WRED profile.

1163