Reference Guide

Field Description
NOTE: The CAM entries for the default rule are not included in
this column; a CAM entry for the default rule is always dedicated
to a port and is always available for that interface.
Status (Allowed
ports)
Indicates if the input policy map configuration on an interface
belonging to a linecard/port-pipe is successful — Allowed (n) — or
not successful — Exception. The allowed number (n) indicates the
number of ports in that port-pipe on which the Policy Map can be
applied successfully.
NOTE: In a Layer 2 Policy Map, IPv4/IPv6 rules are not allowed; therefore, the output
contains only L2ACL CAM partition entries.
Example
FTOS# test cam-usage service-policy input pmap_l2 linecard all
For a L2 Input Policy Map pmap_l2, the output must be as
follows,
Linecard|Portpipe|CAM Partition|Available CAM|Estimated CAM|
Status
| | | |per Port |
(Allowed ports)
0 0 L2ACL 500 200
Allowed (2)
0 1 L2ACL 100 200
Exception
1 0 L2ACL 1000 200
Allowed (5)
1 1 L2ACL 0 200
Exception
…
…
…
13 1 L2ACL 400 200
Allowed (2)
FTOS#
threshold
Specify the minimum and maximum threshold values for the configured WRED profiles.
Z-Series
Syntax
threshold min number max number
To remove the threshold values, use the no threshold min number max number
command.
Parameters
min number Enter the keyword min then the minimum threshold number for the
WRED profile. The range is from 1024KB to 77824KB.
max number Enter the keyword max then the maximum threshold number for the
WRED profile. The range is from 1024KB to 77824KB.
1158