Reference Guide

Parameters
vlan vlan-id (OPTIONAL) Enter a VLAN ID to display TIB information PIM-SM
snooping discovered on a specified VLAN. The valid VLAN IDs range
is from 1 to 4094.
group-address (OPTIONAL) Enter the group address in dotted decimal format
(A.B.C.D) to display TIB information PIM-SM snooping discovered for
a specified multicast group.
source-address (OPTIONAL) Enter the source address in dotted decimal format
(A.B.C.D) to display TIB information PIM-SM snooping discovered for
a specified multicast source.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.12.0 Introduced on the S4810.
Version 8.4.1.1 Introduced on the E-Series ExaScale.
Usage
Information
The following describes the show ip pim snooping tib commands shown in the
following example.
Field Description
(S, G) Displays the entry in the PIM multicast snooping database.
uptime Displays the amount of time the entry has been in the PIM multicast
route table.
expires Displays the amount of time until the entry expires and is removed
from the database.
RP Displays the IP address of the RP/source for this entry.
flags List the flags to define the entries:
• S = PIM Sparse Mode
• C = directly connected
• L = local to the multicast group
• P = route was pruned
• R = the forwarding entry is pointing toward the RP
• F = FTOS is registering this entry for a multicast source
• T = packets were received via Shortest Tree Path
• J = first packet from the last hop router is received and the
entry is ready to switch to SPT
1070