Reference Guide

Multicast | 823
Example
Figure 26-4. show ip rpf Command Example
show queue backplane multicast
e
Display the backplane bandwidth configuration about how much bandwidth is dedicated to multicast
versus unicast.
Syntax
show queue backplane multicast bandwidth-percentage
Defaults
None
Command Modes
EXEC
EXEC Privilege
Command
History
Example
Figure 26-5. show queue backplane multicast Command Example
Related
Commands
IPv6 Multicast Commands
IPv6 Multicast commands are:
• clear ipv6 mroute
• ipv6 multicast-limit
• ipv6 multicast-routing
• show ipv6 mroute
• show ipv6 mroute mld
• show ipv6 mroute summary
FTOS#show ip rpf
RPF information for 10.10.10.9
RPF interface: Gi 3/4
RPF neighbor: 165.87.31.4
RPF route/mask: 10.10.10.9/255.255.255.255
RPF type: unicast
Version 7.7.1.0 Introduced on E-Series
FTOS#show queue backplane multicast bandwidth-percent
Configured multicast bandwidth percentage is 80
queue backplane
multicast
Reallocate the amount of bandwidth dedicated to multicast traffic.