Reference Guide

118 | Control and Monitoring
www.dell.com | support.dell.com
Example 2
Figure 4-31. Command Example: show processes cpu rp1
Example 3
Figure 4-32. Command Example: show processes cpu rp2
Usage
Information
The CPU utilization for the last five seconds as shown in Figure 4-30 is 4%/2%. The first
number (4%) is the CPU utilization for the last five seconds. The second number (2%)
indicates the percent of CPU time spent at the interrupt level.
FTOS#show processes cpu rp1
CPU utilization for five seconds: 0%/0%; one minute: 0%; five minutes: 0%
PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY
Process
0x0000007c 60 6 10000 0.00% 0.00% 0.00% 0
ospf
0x00000077 460 46 10000 0.00% 0.00% 0.00% 0
dsm
0x00000074 100 10 10000 0.00% 0.00% 0.00% 0
ipm1
0x0000006e 180 18 10000 0.00% 0.00% 0.00% 0
rtm
0x0000006b 100 10 10000 0.00% 0.00% 0.00% 0
rip
0x00000068 120 12 10000 0.00% 0.00% 0.00% 0
acl
0x00000064 690 69 10000 0.00% 0.00% 0.00% 0
sysd1
FTOS#show processes cpu rp2
CPU utilization for five seconds: 0%/0%; one minute: 0%; five minutes: 0%
PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY
Process
0x00000090 140 14 10000 0.00% 0.00% 0.00% 0
vrrp
0x0000008d 120 12 10000 0.00% 0.00% 0.00% 0
fvrp
0x00000088 360 36 10000 0.00% 0.00% 0.00% 0
xstp
0x00000084 60 6 10000 0.00% 0.00% 0.00% 0
span
0x00000083 180 18 10000 0.00% 0.00% 0.00% 0
pim
0x00000080 80 8 10000 0.00% 0.00% 0.00% 0
igmp
0x0000007b 130 13 10000 0.00% 0.00% 0.00% 0
ipm2
0x00000078 700 70 10000 0.00% 0.00% 0.00% 0
mrtm
0x00000074 100 10 10000 0.00% 0.00% 0.00% 0
l2mgr
0x00000070 80 8 10000 0.00% 0.00% 0.00% 0