Manualshelf

Owner's Manual

ManualsBrandsDell ManualsserversDell FC San
61626364656667686970
Dell 8/4Gbps FC SAN Module Administrator’s Guide 47
53-1001345-01
firmwareDownloadStatus
B
• The switch is a single-CP switch in an interop fabric and does not support Coordinated HotCode
Load.
firmwareDownloadStatus
Displays the status of a firmware download.
Synopsis firmwaredownloadstatus
Description Use this command to display an event log that records the progress and status of events during
FOS, SAS, and SA firmwaredownload. The event log is created by the current firmwaredownload
command and is kept until another firmwaredownload command is issued. There is a timestamp
associated with each event.
When downloading SAS or SA in systems with two control processor (CP) cards, you can only run
this command on the active CP. When downloading FOS, the event logs in the two CPs are
synchronized. This command can be run from either CP.
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to “Understanding Virtual Fabric restrictions” on page 32 and “Understanding
Admin Domain restrictions” on page 33 for details.
Operands none
Examples The following example shows the status of the firmwaredownload for an SAS image to the blades in
slot 2 and 7.
switch:admin> firmwaredownloadstatus
[1]: Thu Jul 28 00:30:49 2007
Slot 2 (SAS): Firmware is being downloaded to the blade. It may take up to 30
minutes.
[2]: Thu Jul 28 00:30:49 2007
Slot 7 (SAS): Firmware is being downloaded to the blade. It may take up to 30
minutes.
[3]: Thu Jul 28 00:37:42 2007
Slot 2 (SAS): Firmware has been downloaded successfully to the blade.
[4]: Thu Jul 28 00:37:42 2007
Slot 7 (SAS): Firmware has been downloaded successfully to the blade.
[5]: Thu Jul 28 00:37:50 2007
Slot 2 (SAS): Blade is rebooting.
[6]: Thu Jul 28 00:37:50 2007
Slot 7 (SAS): Blade is rebooting.
[7]: Thu Jul 28 00:37:50 2007
Slot 2 (SAS): Firmware commit is started.
[8]: Thu Jul 28 00:37:50 2007
Slot 7 (SAS): Firmware commit is started.
[9]: Thu Jul 28 00:37:50 2007
Slot 2 (SAS): Firmware commit has completed.