Owner's Manual

6 Dell 8/4Gbps FC SAN Module Administrator’s Guide
53-1001345-01
Port mapping
2
3. Enter the ag --mapshow command and specify the port number to display the list of mapped
internal ports (F_Ports). Verify that the added internal ports (F_Ports) appear in the list.
switch:admin> ag --mapshow 13
N_Port : 13
Failover(1=enabled/0=disabled) : 1
Failback(1=enabled/0=disabled) : 1
Current F_Ports : None
Configured F_Ports : 6;7
PG_ID : 0
PG_Name : pg0
Removing internal ports (F_Ports) from external ports (N_Ports)
1. Connect to the FC SAN Module and log in using an account assigned to the admin role.
2. Enter the ag
--mapdel command to remove the internal port from the external port.
The f_portlist can contain multiple internal port numbers separated by semicolons, for
example “17;18”.
switch:admin> ag --mapdel 17;18
F-Port to N-Port mapping has been updated successfully
3. Enter the switchshow command to verify that the internal port is free (unassigned).
Unassigned F_Port status is Disabled (No mapping for internal port). See port 6 in the following
example.
switch:admin> switchshow
switchName: fsw534_4016
switchType: 45.0
switchState: Online
switchMode: Access Gateway Mode
switchWwn: 10:00:00:05:1e:02:1d:b0
switchBeacon: OFF
Area Port Media Speed State Proto
=====================================
0 0 cu AN No_Sync
1 1 cu AN No_Sync Disabled (N-Port Offline for F-Port)
2 2 cu AN No_Sync Disabled (N-Port Offline for F-Port)
3 3 cu AN No_Sync Disabled (N-Port Offline for F-Port)
4 4 cu AN No_Sync Disabled (N-Port Offline for F-Port)
5 5 cu AN No_Sync Disabled (N-Port Offline for F-Port)
6 6 cu AN No_Sync Disabled (No mapping for F-Port)
7 7 cu AN No_Sync
8 8 cu AN No_Sync
9 9 cu AN No_Sync
10 10 -- N4 No_Module
11 11 -- N4 No_Module
12 12 -- N4 No_Module
13 13 id N4 Online N-Port 10:00:00:05:1e:35:10:1e 0x5a0a00
14 14 id N4 Online N-Port 10:00:00:05:1e:35:10:1e 0x5a0900
15 15 id N4 Online N-Port 10:00:00:05:1e:35:10:1e 0x5a0800