Install Guide

PS Series 50E to 400E QuickStart Step 3. Set the RAID Policy

Select the RAID policy for the member.

The pool capacity values in the dialog box table will change, depending on the

selected RAID policy. For example, in the preceding dialog box, selecting RAID-

50 provides an estimated capacity of 5.24 TB. In contrast, selecting RAID-10

would provide less capacity, while selecting RAID-5 would provide more

capacity.

Click

Next to continue. The Configure Member – Summary dialog box appears.

Configure Member – Summary

If the member configuration is satisfactory, click

Finish. The following Group

Summary window shows a completed configuration for a one-member group.