Install Guide

PS Series 50E to 400E QuickStart Step 1. Set Up the Array Hardware Configuration
8
B. Mount Array in a Rack
A PS Series array must be mounted in a two-pole or four-pole 19” rack. Be sure
there is sufficient space for air flow in front of and behind the rack and the room
has proper ventilation.
Attach an electrostatic wrist strap to your wrist and a grounded device before
handling the array chassis.
To mount the array in a rack, refer to the steps in the figures shown next.
Mounting in a Two-Pole Rack
The storage array chassis is heavy. Do not attempt to lift or install the
array without assistance.