Setup Guide

Step 5: Attach the Chassis to the Mounting Rails
Secure the chassis to the mounting rails as follows:
1. On both sides, tighten the captive fasteners on the front of the chassis into the lower clip nuts. See
Figure 5.
2. On both sides, attach the rear of the chassis to the brackets on the left and right rails using the Posi
screws from the COMMON bag. Insert the screws from the inside of the rack, as shown in Figure 5
(shows only one side for clarity). You must secure the array to the rear brackets.
Caution: Failure to attach the array to the brackets can affect the stability of the array and reduce the
life of the drives.
Figure 5 Attaching the Chassis to the Mounting Rails
8 PS4000 Rack Mount Instructions