Owners Manual

Table 5. Status LED indicators and descriptions (continued)
Icon Description Condition Corrective action
NOTE: For more information about the
supported PCIe cards, see the Expansion card
installation guidelines section.
Drive indicator codes
Each drive carrier has an activity LED indicator and a status LED indicator. The indicators provide information about the current
status of the drive. The activity LED indicator indicates whether the drive is currently in use or not. The status LED indicator
indicates the power condition of the drive.
Figure 11. Drive indicators
1. Drive activity LED indicator
2. Drive status LED indicator
3. Drive capacity label
Drive status indicator code
Condition
Flashes green twice per second Identifying drive or preparing for removal
Off Drive ready for removal
NOTE: The drive status indicator remains off until all drives
are initialized after the system is turned on. Drives are not
ready for removal during this time.
Flashes green, amber, and then turns off Predicted drive failure
Flashes amber four times per second Drive failed
Flashes green slowly Drive rebuilding
Solid green Drive online
Flashes green for three seconds, amber for three
seconds, and then turns off after six seconds
Rebuild stopped
46 Diagnostics and indicators