Users Guide
SUU disables Enable System Set Update and selects only those component versions that are later than the repository version to
downgrade.
2 Select Downgrade. All downgradeable components are automatically selected.
3 In the Conrm Update dialog box, click Yes to conrm and continue or No to cancel.
While downgrading the components, SUU displays an update report. After completion, SUU displays an Update Complete dialog box.
4 Click OK.
The status of the downgrade can be viewed in the Comparison Report.
Updating system components
SUU compares the version of the components installed on the system with the versions available in the repository. If system component
versions are later than the repository version and vice versa, SUU enables the Update button on the upper-right corner of the Comparison
Report.
To upgrade and downgrade components in a single session:
1 Select Enable System Set Update.
SUU disables Enable Downgrade and Upgrade changes to Update. All the components that can be updated are selected in the
Comparison Report.
2 Click the Update button.
The Conrm Update dialog box with a list of components to be updated is displayed.
3 Click Yes to proceed with the update or No to cancel the update.
If you click Yes, SUU displays the Update dialog box that shows the progress of the update.
4 Click OK when the update is complete.
The status of the update is reected in the Comparison Report.
Updating failures
While updating the system components, if a particular component update is unsuccessful, you can choose to continue or stop updating the
other components. If you select Stop on Update Failures, SUU stops updating the other components.
NOTE
: Stop on Update Failures is enabled only if you have selected more than one component for an update.
12 About graphical user interface mode