Install Guide

Deployment Pack Version 4.0 for Microsoft System Center Configuration Manager User’s Guide at Dell.com/support/
manuals.
NOTE: To upgrade the Configuration Manager, on which DSDP is installed, to the newer version available, first upgrade the
Configuration Manager to the newer version and then upgrade DSDP to the latest version. However, before you upgrade
the console, Dell recommends that you delete all the Dell boot images that were created by using the earlier versions.
Perform the following steps to upgrade to Dell EMC Server Deployment Pack version 4.0:
1. Download and extract the executable file. For information, see step 1 to step 3 of Installing Dell EMC Server Deployment
Pack for the first time.
2. Run the executable file.
A message to confirm whether you want to upgrade to a newer version is displayed.
3. Click Yes.
The Welcome screen is displayed.
4. Click Next.
The license agreement is displayed.
5. Accept the license terms after reading them, and click Next.
If Configuration Manager console is running, then a message is displayed that the Configuration Manager must be closed for
the installation to continue. Close the Configuration Manager Console and proceed with the installation.
6. Click Yes.
The Remove/Retain Dell Deployment ToolKit (DTK) utilities and Windows PE drivers screen displays the following
options:
● Retain Dell Deployment ToolKit (DTK) utilities and Windows PE drivers — Select this option to retain the DTK
utilities and Windows PE drivers imported in to Configuration Manager during the previous installation of Dell EMC Server
Deployment Pack.
● Remove Dell Deployment ToolKit (DTK) utilities and Windows PE drivers — Select this option to remove the DTK
utilities and Windows PE drivers imported in to Configuration Manager during the previous installation of Dell EMC Server
Deployment Pack.
NOTE:
If you select Remove Dell Deployment ToolKit (DTK) utilities and Windows PE drivers, use the
Deployment ToolKit Configuration Wizard to import the DTK package and create Dell boot images after the
installation. For more information on creating Dell boot images, see the “Importing a DTK Package” section of the
Dell EMC Server Deployment Pack Version 4.0 for Microsoft System Center Configuration Manager User’s Guide at
Dell.com/support/manuals.
7. Click Next.
The Ready to Install the Program screen is displayed.
8. Click Install.
The Installing Dell EMC Server Deployment pack for Configuration Manager progress screen is displayed
If a boot image is already present, then a message is displayed asking if you want to delete the boot images previously
created.
9. Select an option to proceed.
The Installation Completed Successfully screen is displayed.
10. Click Finish.
After the installation is complete, use the Deployment ToolKit Configuration Wizard to import the DTK5.x-WINPE-
xxx_Axx.exe (where xxx is the DTK build number and Axx is the DTK revision number) or later. You can download the
latest DTK pack from Dell.com/support. For more information, see “The Importing a DTK Package” section of the Dell EMC
Server Deployment Pack Version 4.0 for Microsoft System Center Configuration Manager User’s Guide at Dell.com/support/
manuals.
Overview
9