CLI Guide
Table Of Contents
- Dell EMC PowerVault ME4 Series Storage System CLI Guide
- Contents
- Using the CLI
- Categorical list of commands
- Alphabetical list of commands
- abort copy
- abort replication
- abort scrub
- abort verify
- add disk-group
- add host-group-members
- add host-members
- add ipv6-address
- add spares
- add storage
- add volume-group-members
- check firmware-upgrade-health
- check support-assist
- clear cache
- clear disk-metadata
- clear dns-parameters
- clear events
- clear expander-status
- clear fde-keys
- clear fenced-data
- clear replication-queue
- clear support-assist-proxy
- copy volume
- create certificate
- create chap-record
- create host
- create host-group
- create peer-connection
- create replication-set
- create schedule
- create snapshots
- create task
- create user
- create vdisk
- create volume
- create volume-group
- create volume-set
- delete all-snapshots
- delete chap-records
- delete host-groups
- delete hosts
- delete initiator-nickname
- delete peer-connection
- delete pools
- delete remote-system
- delete replication-set
- delete schedule
- delete snapshot
- delete task
- delete user
- delete vdisks
- delete volume-groups
- delete volumes
- dequarantine
- exit
- expand disk-group
- expand vdisk
- expand volume
- fail
- help
- map volume
- meta
- ping
- query peer-connection
- recover replication-set
- release volume
- remove disk-groups
- remove host-group-members
- remove host-members
- remove ipv6-address
- remove spares
- remove volume-group-members
- replicate
- rescan
- reset all-statistics
- reset controller-statistics
- reset disk-error-statistics
- reset disk-group-statistics
- reset disk-statistics
- reset dns-management-hostname
- reset host-link
- reset host-port-statistics
- reset pool-statistics
- reset smis-configuration
- reset snapshot
- reset vdisk-statistics
- reset volume-statistics
- restart mc
- restart sc
- restore defaults
- resume replication-set
- rollback volume
- scrub disk-groups
- scrub vdisk
- scrub volume
- send support-assist-logs
- set advanced-settings
- set chap-record
- set cli-parameters
- set cloud-iq
- set controller-date
- set debug-log-parameters
- set disk
- set disk-group
- set disk-parameters
- set dns-management-hostname
- set dns-parameters
- set email-parameters
- set enclosure
- set expander-fault-isolation
- set expander-phy
- set fde-import-key
- set fde-lock-key
- set fde-state
- set host
- set host-group
- set host-parameters
- set host-port-mode
- set initiator
- set ipv6-network-parameters
- set iscsi-parameters
- set led
- set network-parameters
- set ntp-parameters
- set password
- set peer-connection
- set pool
- set prompt
- set protocols
- set replication-set
- set schedule
- set snapshot-space
- set snmp-parameters
- set support-assist
- set support-assist-info
- set support-assist-proxy
- set syslog-parameters
- set system
- set task
- set user
- set vdisk
- set volume
- set volume-cache-parameters
- set volume-group
- show advanced-settings
- show cache-parameters
- show certificate
- show chap-records
- show cli-parameters
- show cloud-iq
- show configuration
- show controller-date
- show controllers
- show controller-statistics
- show debug-log-parameters
- show disk-groups
- show disk-group-statistics
- show disk-parameters
- show disks
- show disk-statistics
- show dns-management-hostname
- show dns-parameters
- show email-parameters
- show enclosures
- show events
- show expander-status
- show fan-modules
- show fans
- show fde-state
- show fenced-data
- show frus
- show host-groups
- show host-phy-statistics
- show host-port statistics
- show initiators
- show inquiry
- show ipv6-addresses
- show ipv6-network-parameters
- show iscsi-parameters
- show license
- show maps
- show network-parameters
- show ntp-status
- show peer-connections
- show pools
- show pool-statistics
- show ports
- show power-supplies
- show protocols
- show provisioning
- show redundancy-mode
- show refresh-counters
- show remote-systems
- show replication-sets
- show replication-snapshot-history
- show sas-link-health
- show schedules
- show sensor-status
- show service-tag-info
- show sessions
- show shutdown-status
- show snapshot-space
- show snapshots
- show snmp-parameters
- show support-assist
- show syslog-parameters
- show system
- show system-parameters
- show tasks
- show tiers
- show tier-statistics
- show unwritable-cache
- show users
- show vdisks
- show vdisk-statistics
- show versions
- show volume-copies
- show volume-groups
- show volume-names
- show volume-reservations
- show volume-statistics
- show volumes
- shutdown
- suspend replication-set
- test
- trust
- unfail controller
- unmap volume
- verify disk-groups
- verify links
- verify vdisk
- API basetype properties
- adapt-expand-preview
- advanced-settings-table
- cache-parameter
- cache-settings
- certificate-status
- chap-records
- cli-parameters
- cloud-iq
- code-load-readiness
- code-load-readiness-reasons
- communication-ports
- compact-flash
- contact-information
- controller-cache-parameters
- controllers
- controller-statistics
- copy-volumes
- cs-replicate-tasks
- cs-replication
- cs-replication-set
- current-replication-snapshots
- debug-log-parameters
- disk-groups
- disk-groups-preview
- disk-group-statistics
- disk-group-statistics-paged
- disk-hist-statistics
- disk-statistics
- dns-parameters
- drawers
- drive-parameters
- drive-summary
- drives
- email-parameters
- enclosure-fru
- enclosure-list
- enclosures
- events
- eventsLogs
- expander-ports
- expander-versions
- expanders
- fan
- fan-module-versions
- fan-modules
- fc-port
- fde-state
- fenced-data
- fru-versions
- host
- host-group
- host-group-view
- host-port-statistics
- host-view-mappings
- initiator
- initiator-view
- inquiry
- io-modules
- iom-versions
- ipv6-network-parameters
- iscsi-parameters
- iscsi-port
- license
- local-ports
- local-ports-detail
- log-header-table
- mgmt-hostnames
- midplane-versions
- network-parameters
- ntp-status
- peer-connection-info
- peer-connections
- peer-controllers
- peer-ports
- pool-hist-statistics
- pool-statistics
- pool-summary
- pools
- port
- power-supplies
- product-info
- provisioning
- proxy-information
- psu-versions
- readcache-hist-statistics
- redundancy
- refresh-counters
- remote-ports
- remote-ports-detail
- remote-system
- replication-snapshot-history
- reset-snapshot-tasks
- resettable-statistics
- sas-host-phy-statistics
- sas-port
- sas-status-controller-a
- sas-status-drawer
- schedules
- security-communications-protocols
- sensors
- service-tag-info
- sessions
- show-other-MC-status
- shutdown-status
- sideplanes
- snap-space
- snapshots
- snapshot-with-retention-tasks
- snap-tasks
- snmp-parameters
- spares-preview
- status
- storage-preview
- support-assist
- syslog-parameters
- system
- system-parameters-table
- tasks
- tier-hist-statistics
- tier-statistics
- tier-summary
- tiers
- time-settings-table
- unhealthy-component
- unused-disks-preview
- unwritable-cache
- users
- vdisk-hist-statistics
- vdisk-statistics
- versions
- virtual-disk-summary
- virtual-disks
- volume-groups
- volume-group-view
- volume-group-view-mappings
- volume-names
- volume-reservations
- volumes
- volume-statistics
- volume-view
- volume-view-mappings
- Settings changed by restore defaults
Table 28. disk-groups properties (continued)
Name Type Description
● 1: RAID1
● 2: ADAPT
● 3: RAID3
● 5: RAID5
● 6: NRAID
● 8: RAID50
● 10: RAID10
● 11: RAID6
diskcount uint16 Number of disks in the disk group.
sparecount uint16 For a linear disk group, the number of spares assigned to the disk group. For a
virtual disk group, 0.
chunksize string
● For RAID levels except NRAID, RAID 1, and RAID 50, the chunk size for the
disk group.
● For NRAID and RAID 1, chunk-size has no meaning and is therefore shown as
not applicable (N/A).
● For RAID 50, the disk-group chunk size calculated as: configured-chunk-
size x (subgroup-members - 1). For a disk group configured to use
64-KB chunk size and 4-disk subgroups, the value would be 192k (64KB x 3).
status string
● CRIT: Critical. The disk group is online but isn't fault tolerant because some
of its disks are down.
● DMGD: Damaged. The disk group is online and fault tolerant, but some of its
disks are damaged.
● FTDN: Fault tolerant with a down disk. The disk group is online and fault
tolerant, but some of its disks are down.
● FTOL: Fault tolerant and online.
● MSNG: Missing. The disk group is online and fault tolerant, but some of its
disks are missing.
● OFFL: Offline. Either the disk group is using offline initialization, or its disks
are down and data may be lost.
● QTCR: Quarantined critical. The disk group is critical with at least one
inaccessible disk. For example, two disks are inaccessible in a RAID-6
disk group or one disk is inaccessible for other fault-tolerant RAID levels.
If the inaccessible disks come online or if after 60 seconds from being
quarantined the disk group is QTCR or QTDN, the disk group is automatically
dequarantined.
● QTDN: Quarantined with a down disk. The RAID-6 disk group has one
inaccessible disk. The disk group is fault tolerant but degraded. If the
inaccessible disks come online or if after 60 seconds from being quarantined
the disk group is QTCR or QTDN, the disk group is automatically
dequarantined.
● QTOF: Quarantined offline. The disk group is offline with multiple inaccessible
disks causing user data to be incomplete, or is an NRAID or RAID-0 disk
group.
● STOP: The disk group is stopped.
● UNKN: Unknown.
● UP: Up. The disk group is online and does not have fault-tolerant attributes.
status-numeric
uint32
Numeric equivalents for status values.
● 0: FTOL
● 1: FTDN
● 2: CRIT
● 3: OFFL
● 4: QTCR
API basetype properties 317