CLI Guide

Switch Management Commands 2344
show version
Use the show version command in User Exec mode to displays the system
version information.
Syntax
show version [unit ]
• unit — The unit number.
Default Configuration
This command has no default configuration.
Command Mode
User Exec mode, Privileged Exec mode, Global Configuration mode and all
Configuration submodes
User Guidelines
This command shows the version information for the stack master if no
arguments are given.
Example
console#show version
Machine Description............... Dell Networking Switch
System Model ID................... N4064
Machine Type...................... Dell Networking N4064
Serial Number..................... X01-64C-55
Manufacturer...................... 0xbc00
Burned In MAC Address............. D067.E5C0.D19B
System Object ID.................. 1.3.6.1.4.1.674.10895.3045
CPU Version....................... XLP308H-A1
SOC Version....................... BCM56846_A1
HW Version........................ 3
CPLD Version...................... 14
Boot Version...................... v1.0.21
Image File........................ N3000-ONv6.0.0.1
Software Capability............... Stack Limit = 12, VLAN Limit = 4093
unit active backup current-active next-active
---- ----------- ----------- -------------- --------------