CLI Guide

Switch Management Commands 2325
Slot........................... 1
Card Index (CID)............... 6
Model Identifier............... Dell SFP+ Card
Slot........................... 1
Card Index (CID)............... 7
Model Identifier............... Dell 10GBase-T Card
show switch
Use the show switch command to display information about units in the
stack.
Syntax
show switch [ stack–standby | unit ]
show switch stack–ports
show switch stack–ports counters { all | <unit>}
show switch stack–ports diag {all | <unit> } { verbose }
show switch stack–ports stack-path {all | from-unit to-unit }
• unit—The stack member number.
• stack–ports—Display summary stack-port information for all units.
• counters—Display summary data counter information for all units.
• diag—Display stacking diagnostics for each unit.
• stack-path—Display the active path from one stacking unit to another.
• From-unit—The first unit to be listed.
• all—Displays all unit paths.
• To-unit—The last unit to be listed.
• stack–standby—Display the configured or automatically selected
standby unit number.
• verbose—Display detailed information.
Default Configuration
By default, the information for all units is displayed.