CLI Guide

Switch Management Commands 2251
Default Configuration
The default console logging severity is warnings.
Command Mode
Global Configuration mode
User Guidelines
Messages at the selected level and above (numerically lower) are displayed on
the console. Debug level messages (logging console 7) are intended for use by
support personnel. The output is voluminous, cryptic, and because of the
large number of messages generated, can adversely affect switch operations.
Only set the logging level to debug under the direction of support personnel.
Example
The following example limits messages logged to the console based on
severity level “alerts”.
console(config)#logging console alerts
logging facility
Use the logging facility command in Global Configuration mode to
configure the facility to be used in log messages.
Syntax
logging facility facility
no logging facility
• facility—The facility that will be indicated in the message. (Range:
local0, local1, local2, local3, local4, local5, local6, local7).
Default Configuration
The default logging facility is local7.
Command Mode
Global Configuration mode