CLI Guide

Switch Management Commands 2130
NOTE: Debug commands are not persistent across resets.
debug aaa
Use the debug aaa command to track AAA events.
Use the no form of the command to disable accounting debugging.
Syntax
debug aaa { accounting | coa | pod }
no debug aaa { accounting | coa | pod }
• accounting—Trace events for RADIUS accounting server interactions.
• coa—Trace events for RADIUS CoA server interactions (such as,
RADIUS bounce host port, disable host port, …).
• pod—Trace events for RADIUS POD (RADIUS Disconnect-Request)
server instructions.
debug
authentication
interface
debug ip bgp debug ipv6 pimdm debug udld
debug auto-voip debug ip device
tracking
debug ospf debug vpc
debug bfd debug ip dvmrp debug lacp debug vrrp
debug cfm debug ip igmp debug mldsnooping ip http timeout-policy
debug clear debug ip mcache debug ospfv3
packet
exception protocol
debug console debug ip pimdm
packet
debug ping exception switch-chip-
register
debug crashlog debug ip pimsm
packet
debug rip show debugging
debug dhcp packet debug ip vrrp debug sflow show supported mibs
debug dhcp server
packet
debug ipv6 dhcp debug spanning-
tree
show supported mibs
debug dot1x debug ipv6 mcache debug tacacs snapshot bgp
– debug ipv6 mld debug transfer write core