CLI Guide

Dell EMC Networking CLI 213
SNMP
sflow sampling (Interface
Mode)
Enables a new sflow sampler instance for this
data source if rcvr_idx is valid.
IC
sflow source-interface Selects the interface from which to use the IP
address inserted in the source IP address field of
transmitted sFlow packets.
GC
show sflow agent Displays the sflow agent information. PE
show sflow destination Displays all the configuration information
related to the sFlow receivers.
PE
show sflow polling Displays the sFlow polling instances created on
the switch.
PE
show sflow sampling Displays the sFlow sampling instances created
on the switch.
PE
show sflow source-interface Displays the assigned sFlow source interface. PE or
GC
a. For the meaning of each Mode abbreviation, see Mode Types .
Command Description Mode
a
show snmp Displays the SNMP status. PE
show snmp engineid Displays the SNMP engine ID. PE
show snmp filters Displays the configuration of filters. PE
show snmp group Displays the configuration of groups. PE
show snmp user Displays the configuration of users. PE
show snmp views Displays the configuration of views. PE
show trapflags Displays SNMP traps globally or displays
specific SNMP traps.
PE
snmp-server community Sets up the community access string to permit
access to SNMP protocol.
GC
snmp-server community-
group
Maps SNMP v1 and v2 security models to the
group name.
GC
snmp-server contact Set s up a system contact (sysContact) string. GC
Command Description Mode
a