CLI Guide

Layer 3 Routing Commands 1896
Syntax
show vrrp [brief | group]
• group—The virtual router group identifier. Range 1-255.
• brief—Provide a summary view of the VRRP group information.
Default Configuration
Show information on all VRRP groups.
Command Mode
User Exec, Privileged Exec mode, Global Configuration mode and all
Configuration submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays detailed VRRP status.
console# show vrrp
Admin Mode..................................... Enable
Router Checksum Errors......................... 0
Router Version Errors.......................... 0
Router VRID Errors............................. 0
Vlan 7 – Group 1
Primary IP Address............................. 192.168.5.55
VMAC Address................................... 0000.5E00.0101
Authentication Type............................ None
Priority....................................... 60
Configured Priority............................ 100
Advertisement Interval (secs).................. 10
Accept Mode.................................... Enable
Pre-empt Mode.................................. Enable
Pre-empt Delay................................. Enable
Administrative Mode............................ Enable
State.......................................... Initialized
Timers Learn Mode.............................. Enable
Description....................................
Track Interface................................ vlan 3
Track Interface State.......................... Down
Track Interface DecrementPriority ............. 20
Track Route (pfx/len) ......................... 10.10.10.0/24