CLI Guide

Layer 3 Routing Commands 1790
area virtual-link transmit-delay
Use the area virtual-link transmit-delay command in Router OSPFv3
Configuration mode to configure the transmit delay for the OSPF virtual
interface on the virtual interface identified by areaid and neighbor.
Syntax
area areaid virtual-link neighbor transmit-delay seconds
no area areaid virtual-link neighbor transmit-delay
• areaid — Valid OSPFv3 area identifier.
• neighbor — Router ID of neighbor.
• seconds — Transmit delay interval. (Range: 0-3600)
Default Configuration
1 is the default value for seconds.
Command Mode
Router OSPFv3 Configuration mode.
User Guidelines
This command has no user guidelines.
Example
The following example configures a 20-second transmit delay for the OSPF
virtual interface on the virtual interface identified by area 1 and its neighbor.
console(config)#ipv6 router ospf
console(config-rtr)#area 1 virtual-link 2 transmit-delay 20
default-information originate (Router OSPFv3
Configuration)
Use the default-information originate command in Router OSPFv3
Configuration mode to control the advertisement of default routes. Use the
no form of the command to return the default route advertisement settings
to the default value.